What issues does this firmware fix on OnePlus 55UC1A00?

This verified stock firmware restores OnePlus 55UC1A00 from bootlooping, hanging on the startup logo screen, "Storage space running out" partition warnings, and corrupted Android system files.

How do I verify hardware compatibility before flashing OnePlus 55UC1A00?

Verify that your physical motherboard model matches MT5670 / MS-R51AP836 and that the display panel code on your TV chassis matches before flashing to prevent inverted screen colors or bricked bootloaders.

🔒 Locked Firmware

Android TV

OnePlus 55UC1A00 USB Firmware

Official Stock Recovery Binary & Mainboard Software

Software OnePlus 55UC1A00 USB Firmware

Version N/A

File Size 📦 1.15 GB

Compatibility ✓ 55UC1A00

🔒 Firmware Download Locked

Purchase this software through WhatsApp to get access to the firmware.

Direct file downloads are locked to protect against corrupted installations. Click below to verify your motherboard/display panel compatibility and complete software purchase via WhatsApp.

Download Firmware (via WhatsApp)

💬 Official WhatsApp: +91 79003 01435 | Pre-filled: TV Model & Software Name

🔒 Access Protocol: No firmware file is downloaded directly from this website. The software is delivered securely by Ambi Support after technician review.

Technician Consultation Details →

⚡ Quick Answer

This USB recovery package is verified for the OnePlus 55UC1A00 Smart TV (Motherboard: MT5670 / MS-R51AP836, Panel ID: ST5461D07-1 / CSOT 55). It resolves stuck on logo, bootloop, and software update crashes via standard FAT32 USB flashing.

OnePlus 55UC1A00 Technical Specifications & Board Details

Television Brand	OnePlus
Exact TV Model	55UC1A00 (View Full Model Specs →)
Software / Firmware Name	OnePlus 55UC1A00 USB Firmware
Binary File Name	`ONEPLUS_55UC1A00_4K_USB_FIRMWARE_AMBI_SUPPORT.rar`
Software Version	N/A
Package Size	📦 1.15 GB
Target Motherboard	`MT5670 / MS-R51AP836`
Panel / Display ID	`ST5461D07-1 / CSOT 55`
Package Classification	USB Firmware (RAR/ZIP)
Flashing Method	USB Flash Drive (FAT32, Root Directory)
File Checksum	`f1c49b8092d377b819fbc9472e38c91a`
Compatibility Status	✓ Verified Compatible (Technician hardware-matched binary package)

⚠ Check Compatibility Before Installation

Hardware Warning: Installing incompatible firmware may cause software failure or prevent the TV from booting. Ensure that the motherboard number ( MT5670 / MS-R51AP836 ) and display panel code match the physical sticker on your TV chassis before flashing.

USB Installation & Flashing Instructions

Follow our standard verified technician protocol to prepare the USB flash drive and safely flash this TV:

Format a USB flash drive (8GB or 16GB USB 2.0 recommended) to FAT32 with MBR partition scheme.
Extract the downloaded firmware archive (.zip or .rar). Locate the target firmware installation file (.bin, .pkg, .img, or update.zip / CtvUpgrade.bin / allupgrade_*.bin) and copy or move it directly to the root directory of the USB drive (do not put it inside any subfolder).
Turn off the television and disconnect the AC power cord from the wall outlet for at least 60 seconds.
Insert the USB flash drive into the USB 2.0 port on the television chassis.
Press and hold the physical power button on the TV panel, then reconnect the power cord.
Keep holding the power button until the standby LED begins flashing rapidly or the software upgrading screen appears.
DO NOT disconnect power or unplug the USB drive during upgrading. Wait for progress to reach 100% and the TV will reboot automatically. When the welcome screen appears, pair your remote control and complete initial setup.

Read Full Guide: How to Install Smart TV Firmware From USB →