Telefunken TF55UHD550 USB Firmware
Official Stock Recovery Binary & Mainboard Software
Purchase this software through WhatsApp to get access to the firmware.
Direct file downloads are locked to protect against corrupted installations. Click below to verify your motherboard/display panel compatibility and complete software purchase via WhatsApp.
| Television Brand | Telefunken |
|---|---|
| Exact TV Model | TF55UHD550 (View Full Model Specs →) |
| Software / Firmware Name | Telefunken TF55UHD550 USB Firmware |
| Binary File Name | TELEFUNKEN_TF55UHD550_17MB170_upgrade.bin |
| Software Version | N/A |
| Package Size | 📦 1.35 GB |
| Target Motherboard | 17MB170 |
| Panel / Display ID | VES550QNDL-2D-N11 |
| Package Classification | USB Binary (BIN) |
| Flashing Method | Place upgrade.bin on FAT32 USB. Insert in TV. Unplug power cord, reinsert while holding OK key on remote. |
| File Checksum | e0f1a2b3c45678901567890123456780 |
| Compatibility Status | ✓ Verified Compatible (Technician hardware-matched binary package) |
⚠ Check Compatibility Before Installation
Hardware Warning:
Installing incompatible firmware may cause software failure or prevent the TV from booting. Ensure that the motherboard number ( 17MB170
) and display panel code match the physical sticker on your TV chassis before flashing.
USB Installation & Flashing Instructions
Follow our standard verified technician protocol to prepare the USB flash drive and safely flash this TV:
- Format a USB flash drive (8GB or 16GB USB 2.0 recommended) to FAT32 with MBR partition scheme.
- Extract the downloaded firmware archive (.zip or .rar). Locate the target firmware installation file (.bin, .pkg, .img, or update.zip / CtvUpgrade.bin / allupgrade_*.bin) and copy or move it directly to the root directory of the USB drive (do not put it inside any subfolder).
- Turn off the television and disconnect the AC power cord from the wall outlet for at least 60 seconds.
- Insert the USB flash drive into the USB 2.0 port on the television chassis.
- Press and hold the physical power button on the TV panel, then reconnect the power cord.
- Keep holding the power button until the standby LED begins flashing rapidly or the software upgrading screen appears.
- DO NOT disconnect power or unplug the USB drive during upgrading. Wait for progress to reach 100% and the TV will reboot automatically. When the welcome screen appears, pair your remote control and complete initial setup.
Common Software Problems Resolved by this Firmware
Flashing this verified USB firmware binary package resolves the following common operating system failures:
TV powers on, displays manufacturer logo, and hangs indefinitely without loading Android.
Fix Boot Logo Hang →TV restarts repeatedly in an endless reboot loop every 30 to 60 seconds after startup.
Bootloop Repair Guide →Corrupted cached data blocks app updates and freezes system settings menus.
Clear Storage Issue →Other Telefunken TV Models
Telefunken TF32FHD300
- Screen Size 32 Inch
-
Motherboard
17MB211 -
Panel ID
VES315WNDL-2D-N01
Need Direct Technician Assistance?
Connect with certified TV technicians for motherboard matching, bootloop troubleshooting, and verified USB firmware guidance.